The high-temperature mechanical response of solid-state core monolith under operating condition

LIANG Lichuang; TIAN Jun; SU Dongchuan; LI Hui; JIANG Naibin

doi:10.13471/j.cnki.acta.snus.2023B010

您当前的位置：

首页 >

文章列表页 >

The high-temperature mechanical response of solid-state core monolith under operating condition

Research articles | 更新时间：2024-04-10

- The high-temperature mechanical response of solid-state core monolith under operating condition
- Acta Scientiarum Naturalium Universitatis Sunyatseni Vol. 63, Issue 2, Pages: 95-107(2024)
- 作者机构：
  
  1.中山大学中法核工程与技术学院，广东珠海 519082
  2.中国核动力研究设计院核反应堆系统设计技术重点实验室，四川成都 610213
- 作者简介：
  
  LIANG Lichuang（lianglch5@mail2.sysu.edu.cn）
  TIAN Jun（tianjunhd@163.com）
  SU Dongchuan（sdc03@139.com）
  LI Hui（757529786@qq.com）
  [ "JIANG Naibin（jiangnb@mail.sysu.edu.cn）" ]
- 基金信息：
- DOI：10.13471/j.cnki.acta.snus.2023B010
  CLC： T341
- Published：25 March 2024，
  
  Published Online：03 July 2023，
  
  Received：21 March 2023，
  
  Accepted：07 April 2023
扫描看全文
梁立创,田俊,苏东川等.运行工况下固态堆芯基体的高温力学响应[J].中山大学学报(自然科学版)(中英文),2024,63(02):95-107.

LIANG Lichuang,TIAN Jun,SU Dongchuan,et al.The high-temperature mechanical response of solid-state core monolith under operating condition[J].Acta Scientiarum Naturalium Universitatis Sunyatseni,2024,63(02):95-107.
梁立创,田俊,苏东川等.运行工况下固态堆芯基体的高温力学响应[J].中山大学学报(自然科学版)(中英文),2024,63(02):95-107. DOI： 10.13471/j.cnki.acta.snus.2023B010.

LIANG Lichuang,TIAN Jun,SU Dongchuan,et al.The high-temperature mechanical response of solid-state core monolith under operating condition[J].Acta Scientiarum Naturalium Universitatis Sunyatseni,2024,63(02):95-107. DOI： 10.13471/j.cnki.acta.snus.2023B010.

摘要

热管冷却反应堆是核反应堆电池的首选堆芯之一，热管堆固态堆芯高温膨胀的力学性能需要引起重视。为了获得热管冷却反应堆316H不锈钢基体在高温下的力学变化，以MegaPower作为分析对象，采用开源蒙特卡罗程序（OpenMC）和商用有限元计算软件ANSYS Mechanical，对反应堆满功率运行工况进行了热力耦合分析。结果表明：1）在满功率运行水平，堆芯基体会产生显著的温度集中和热应力集中，燃料和基体的峰值温度分别为1 023 K和970 K，基体的最大热应力为49.5 MPa；2）在高温蠕变的效应下，基体的应力会显著降低，应力分布趋于均匀；3）在堆芯运行过程中，基体等效总应变只有微小变化，而等效弹性应变的减少和等效蠕变应变的增加几乎是同步且等量进行的。

Abstract

The mechanical properties of heat pipe-cooled reactor which is a preferred core for nuclear reactor batteries at high temperatures needs attention. Taking MegaPower as the object

a thermal-mechanical coupling calculation of the reactor under full power operation condition is carried out using the open source Monte Carlo program (OpenMC) and ANSYS mechanical. The results show: (1) The core monolith generates significant temperature and thermal stress concentration

with peak temperatures of 1 023 K for the fuel and 970 K for the monolith

and the highest thermal stress of 49.5 MPa for the monolith; (2) Because of the effect of high-temperature creep

the stress in the monolith decreases significantly

and the stress distribution tends to be uniform. (3) During the core operation

the total equivalent strain of the monolith changes slightly

while the reduction of the equivalent elastic strain and the increase of the equivalent creep strain is almost simultaneous and equal.

关键词

固态堆芯高温316H不锈钢蠕变

Keywords

solid-state reactor corehigh temperature316H stainless steelcreep

references

ARAFAT Y， van WYK J， 2019. eVinci micro reactor［J］. Nuclear Plant Journal， 37（3）：34-37.

BETTEN J， 2008. Creep mechanics［M］. Berlin：Springer.

CAI F， JI J M， JIANG Z Q， et al， 2018. Engineering fronts in 2018［J］. Engineering， 4（6）： 748-753.

DU X， TAO Y， ZHENG Y， et al， 2021. Reactor core design of UPR-s： A nuclear reactor for silence thermoelectric system NUSTER［J］. Nucl Eng Des， 383（6）： 111404.

ESPOSITO L， BONORA N， de VITA G， 2016. Creep modelling of 316H stainless steel over a wide range of stress［J］. Procedia Struct Integr， 2：927-933.

HORAK J A， SIKKA V K， RASKE D T， 1983. Mechanical properties and microstructures of types 304 and 316 stainless steel after long-term aging［R］. Clinton：Oak Ridge National Lab.

LIU L， LIU B， XIAO Y， et al， 2022. Preliminary thermal and mechanical analysis on the reactor core of a new heat pipe cooled reactor applied in the underwater environment［J］. Prog Nucl Energy， 150：104306.

MA Y， LIU M， XIE B， et al， 2021. Neutronic and thermal-mechanical coupling analyses in a solid-state reactor using Monte Carlo and finite element methods［J］. Ann Nucl Energy， 151： 107923.

MA Y， LIU M， YU H， et al， 2020. Neutronic/Thermal-Mechanical coupling in heat pipe cooled reactor［J］. Nucl Power Eng， 41（4）： 191-196.

MC CLURE P R， POSTON D I， DASARI V R， et al， 2015. Design of megawatt power level heat pipe reactors［R］. Los Alamos， United States： Los Alamos National Lab （LANL）： 29.

NAUMENKO K， ALTENBACH H， 2007. Modeling of creep for structural analysis［M］. Berlin， Heidelberg： Springer Science & Business Media.

NIMS， 1988. NRIMS creep data sheet No. 42［R］. Japan： National Institute for Materials Science：1.

QIU S Z， ZHANG Z Q， ZHANG Z P， et al， 2022. Study on thermal-hydraulic characteristics of ocean silent heat pipe cooled reactor［J］. At Energy Sci Technol， 56（6）： 989-1004.

ROMANO P K， FORGET B， 2013. The OpenMC Monte Carlo particle transport code［J］. Ann Nucl Energy， 51： 274-281.

SIKKA V K， BOOKER B L P， BOOKER M K，et al， 1980. Tensile and creep data on type 316 stainless steel［R］. Clinton：Oak Ridge National Laboratory.

TANG S， LIU X， WANG C， et al，2022. Thermal-electrical coupling characteristic analysis of the heat pipe cooled reactor with static thermoelectric conversion［J］. Ann Nucl Energy， 168： 108870.

WHITTAKER M T， EVANS M， WILSHIRE B， 2012. Long-term creep data prediction for type 316H stainless steel［J］. Mater Sci Eng A， 552： 145-150.

YAN B H， WANG C， LI L G， 2020. The technology of micro heat pipe cooled reactor： A review［J］. Ann Nucl Energy， 135： 106948.

YU H， MA Y， ZHANG Z， et al， 2019. Initiation and development of heat pipe cooled reactor［J］. Nucl Power Eng， 40（4）：1-8.

ZHU J H， BOERMAN D， PIATTI G， 1983. Strength of the AISI 316 stainless steel above 800℃［C］// Transactions of the 7th International Conference on Structural Mechanics in Reactor Technology. Chicago， IIIinois， USA Elsevier Science Publishing Company： 507-514.

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

No data

Related Author

No data

Related Institution

No data

Postal code：510275
Tel：020-84112585，84113223 Email：xuebaozr@mail.sysu.edu.cn
Technical support is provided by Beijing Founder electronics co., LTD 京ICP备09064830号-19 京公网安备11010802024621
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰