Rapid determination of trace mercury in fly ash samples by pyrolysis zeeman atomic absorption spectrometry

NONG Yunjun; XIE Jidan; TANG Wanting; GUO Pengran; SU Liukun; MA Mingyang

doi:10.13471/j.cnki.acta.snus.2016.01.018

您当前的位置：

首页 >

文章列表页 >

Rapid determination of trace mercury in fly ash samples by pyrolysis zeeman atomic absorption spectrometry

更新时间：2023-12-11

- Rapid determination of trace mercury in fly ash samples by pyrolysis zeeman atomic absorption spectrometry
- Acta Scientiarum Naturalium Universitatis SunYatseni Vol. 55, Issue 1, Pages: 102-106(2016)
- 作者机构：
  
  中国广州分析测试中心广东省化学危害应急检测技术重点实验室,广东,广州,510070
- 作者简介：
- 基金信息：
- DOI：10.13471/j.cnki.acta.snus.2016.01.018
  CLC：
- Published：2016，
  
  Published Online：25 January 2016，
扫描看全文
NONG Yunjun, XIE Jidan, TANG Wanting, et al. Rapid determination of trace mercury in fly ash samples by pyrolysis zeeman atomic absorption spectrometry. [J]. Acta Scientiarum Naturalium Universitatis SunYatseni 55(1):102-106(2016)
DOI：

NONG Yunjun, XIE Jidan, TANG Wanting, et al. Rapid determination of trace mercury in fly ash samples by pyrolysis zeeman atomic absorption spectrometry. [J]. Acta Scientiarum Naturalium Universitatis SunYatseni 55(1):102-106(2016) DOI： 10.13471/j.cnki.acta.snus.2016.01.018.

摘要

建立了一种基于固体热解-高频偏振塞曼效应背景校正技术的原子吸收光谱快速测定粉煤灰样品中总汞的方法。对样品基体、取样量、气体流量、记忆效应等实验影响因素进行了研究，在优化的实验条件下，方法的相对标准偏差为3.2%~3.8%（峰面积）和52%~69%（峰高），检出限为0.002 0 μg·g

-1

（3 σ ），加标回收率为94.2%~98.5%。采用本方法测量3个粉煤灰实际样品和3个国家土壤标准物质，并与冷原子吸收测汞仪法进行对照，ｔ检验结果表明两种方法间无显著性差异。该方法简便快捷，定量准确，重现性好，适用于高通量检测粉煤灰样品中的汞含量。

Abstract

In this paper a rapid and simple method using pyrolysis High Frequency Modulated light polarization coupled with Zeeman Atomic Absorption Spectrometry (ZAAS-HFM) was employed for the analysis of total mercury in fly ash samples. The factors those influence the experiment results

such as the sample matrix

quantity of samples

gas flow

memory effect

were studied. Under optimum conditions

the reproducibility of the method was within the range of 3.2%~3.8% for peak area and 5.2%~6.9% for peak height. The detection limit (3 σ ) was 0.002 0 μg·g

-1

 and the recoveries were within the range of 94.2%~98.5%. Three fly ash samples and three standard reference materials were analyzed. These results were consistent with those obtained by the Cold Vapor Atomic Absorption mercury analyzer (CVAAS)

as shown by the result of t -test

no significant difference was found between these two methods. The method was simple，efficient and suitable for high throughput determination of total mercury in fly ash samples.

关键词

固体热解原子吸收光谱粉煤灰汞快速测定

Keywords

pyrolysisatomic absorption spectrometryfly ashmercuryfast determination

references

Views

435

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Test Research of the Flexural Property of Hybrid Fiber Concrete Used for Store Nuclear Waste

Computational Model of Fly Ash Concrete Compressive Strength Based on the Equivalent Age

Related Author

李

艺

赵

文

梁

磊

WANG Jiachun

YAN Peiyu

Related Institution

．College of Resource and Civil Engineering, North East University

2．Panjin Urban and Rural Committee for Construction, Panjin 124010, Liaoning, Chiina

厦门理工学院土木工程系

 2清华大学土木工程系

Postal code：510275
Tel：020-84112585，84113223 Email：xuebaozr@mail.sysu.edu.cn
Technical support is provided by Beijing Founder electronics co., LTD 京ICP备09064830号-19 京公网安备11010802024621
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰